![]() ![]() First of all, go ahead and restart your computer.To do this, follow the instructions given down below: Therefore, you should try changing your boot mode to see if that resolves the issue. As such, you will need to switch back to Legacy Mode to resolve the issue.Ĭhanging the boot mode on your system will not have any effects on your system since you are already facing the problem in question. As it turns out, in case you install Windows in, for example, Legacy Mode and then switch to UEFI, your system will fail to startup. ![]() The first thing that you should do when you encounter the problem in question is to check the boot mode that is being used. Once you have done that, you can get started with the various methods down below right away. ![]() ![]() Before we begin, make sure that you have a storage device installed and that all the cables are properly inserted, if there are any. With that said, we are going to walk you through the whole process and show you how to change the boot mode along with many other things. If you have a hard drive or SSD installed and the error message is still being caused, then it is very likely that the problem is due to the boot mode that is being used. Now, in the scenario where it does not find an operating system installed on your storage device or does not detect the storage device at all, the error message in question is shown. In this article, we are going to show you how to resolve the error message in question so just follow through.Īs it turns out, when you power up your device, the system looks for the location where an operating system is installed after it has been POSTed. In addition to that, the boot mode that you are using can also result in the issue which ultimately is related to your BIOS as well. No Bootable Device – Insert Boot Disk and Press Any key Error Message This can sometimes be caused due to your BIOS settings in which case you can reset the CMOS. Since no operating system is detected, the error message is shown. As it turns out, the problem in question appears when your system cannot detect the hard drive or the location where you have installed an operating system. Error message “ No bootable device - insert boot disk and press any key” appears when users are trying to turn on their systems. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |